![]() |
Soaked! Inflatable ship problems - Printable Version +- RCTgo Forums (https://forums.rctgo.com) +-- Forum: The Games (https://forums.rctgo.com/forum-8.html) +--- Forum: RollerCoaster Tycoon Discussion (https://forums.rctgo.com/forum-9.html) +--- Thread: Soaked! Inflatable ship problems (/thread-15772.html) |
Inflatable ship problems - The magical wishing ghost - Nov 22, 2013 I can't seem to find a way to connect it to the pool complex does anyone know what I have to do to get it connect? RE: Inflatable ship problems - Frankedj - Nov 22, 2013 It just sits on the very edge of the pool. It will turn from red to blue once you have it in the right position. ![]() RE: Inflatable ship problems - The magical wishing ghost - Nov 23, 2013 (Nov 22, 2013, 09:37 PM)Frankedj Wrote: It just sits on the very edge of the pool. It will turn from red to blue once you have it in the right position. I have it sitting by the pools edge but it it still won't open because its "not connected to a pool complex" RE: Inflatable ship problems - Frankedj - Nov 23, 2013 Is the bottom front edge of the slide sitting right on top of the pool edge? If it is raised above the pool it won't open. The one on the left is sitting correctly and is open. The ones in the middle and on the right won't open because they are raised up above the pool. ![]() Even having a tiny hump in the ground that is only 1h up will prevent the slide from opening. This shows a 1h hump in the ground at the far left of the pic. There is a 1h hump under the slide on the left and a 1h raised area under the one on the right. Neither will open because they don't sit on top of the pool edge. ![]() RE: Inflatable ship problems - FlightToAtlantis - Nov 23, 2013 Sometimes the terrain has the minutest hump or dent in it that can't be seen on the screen. To make sure the ground is perfectly flat go to Terrain Tools (shovel icon), Terrain Shaping (the top one of the four), Smooth Terrain (the second one down of the four), then Flatten Terrain in Increments for Rides and Scenery (of the six displaying it's the top middle one). Save your park before trying and start with a small terrain brush size. Try leveling only the area below where you want the inflatable ship. RE: Inflatable ship problems - The magical wishing ghost - Nov 23, 2013 (Nov 23, 2013, 01:56 PM)FlightToAtlantis Wrote: Sometimes the terrain has the minutest hump or dent in it that can't be seen on the screen. I followed your instructions and frankedjs and it still won't open. Its not elevated,I flattened the land And I made sure there wasn't a single dent but it still won't connect to the pool complex. RE: Inflatable ship problems - nathan8848 - Nov 23, 2013 Take a screenshot of the situation, then we can analyze it. RE: Inflatable ship problems - The magical wishing ghost - Nov 23, 2013 (Nov 23, 2013, 03:08 PM)nathan8848 Wrote: Take a screenshot of the situation, then we can analyze it. After messing messing around with the slide I managed to get it to open so no need,the problem was that it wasn't properly at the edge of the pool, so no need. But still Thanks for the help guys I really appreciate it ![]() |