ATI Xpress 1100 not good enough??? - Printable Version +- RCTgo Forums (https://forums.rctgo.com) +-- Forum: The Games (https://forums.rctgo.com/forum-8.html) +--- Forum: RollerCoaster Tycoon Discussion (https://forums.rctgo.com/forum-9.html) +--- Thread: ATI Xpress 1100 not good enough??? (/thread-3797.html)

ATI Xpress 1100 not good enough??? - Wildtron - Nov 10, 2006 This is my first post and I did a little search but found nothing on this matter. I have just installed RCT3, RCT3 Soaked, and RCT3 Wild with updates. My current version is 3.2.8.13 Error message "Your Graphics card or drivers do not meet the minimum requirements to run this application." Here is the first portion of my dxdiag result ------------------ System Information ------------------ Time of this report: 11/10/2006, 11:39:57        Machine name: ALCYONE    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)            Language: English (Regional Setting: English) System Manufacturer: Acer                    System Model: Aspire 5100                    BIOS: Ver 1.00PARTTBL           Processor: AMD Turion™ 64 X2 Mobile Technology TL-50,  MMX,  3DNow (2 CPUs), ~1.6GHz              Memory: 894MB RAM           Page File: 525MB used, 1640MB available         Windows Dir: C:\WINDOWS     DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found      DxDiag Version: 5.03.2600.2180 32bit Unicode ------------ DxDiag Notes ------------   DirectX Files Tab: No problems found.       Display Tab 1: No problems found.         Sound Tab 1: No problems found.           Music Tab: No problems found.           Input Tab: No problems found.         Network Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D:    0/4 (n/a) DirectDraw:  0/4 (retail) DirectInput: 0/5 (n/a) DirectMusic: 0/5 (n/a) DirectPlay:  0/9 (retail) DirectSound: 0/5 (retail) DirectShow:  0/6 (retail) --------------- Display Devices ---------------         Card name: ATI Radeon Xpress 1100      Manufacturer: ATI Technologies Inc.         Chip type: ATI Radeon Xpress Series (0x5975)          DAC type: Internal DAC(400MHz)        Device Key: Enum\PCI\VEN_1002&DEV_5975&SUBSYS_009F1025&REV_00    Display Memory: 128.0 MB      Current Mode: 1280 x 800 (32 bit) (60Hz)           Monitor: Default Monitor   Monitor Max Res:       Driver Name: ati2dvag.dll    Driver Version: 6.14.0010.6626 (English)       DDI Version: 9 (or higher) Driver Attributes: Final Retail Driver Date/Size: 7/18/2006 06:58:30, 258048 bytes       WHQL Logo'd: Yes   WHQL Date Stamp: n/a               VDD: n/a          Mini VDD: ati2mtag.sys     Mini VDD Date: 7/18/2006 06:58:16, 1621504 bytes Device Identifier: {D7B71EE2-1A35-11CF-776A-9520A1C2CB35}         Vendor ID: 0x1002         Device ID: 0x5975         SubSys ID: 0x009F1025       Revision ID: 0x0000       Revision ID: 0x0000       Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive                    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch                    {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive                    {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive                    {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive                    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch          Registry: OK      DDraw Status: Enabled        D3D Status: Enabled        AGP Status: Enabled DDraw Test Result: Not run D3D7 Test Result: Not run D3D8 Test Result: Not run D3D9 Test Result: Not run Any help would be greattly appreated. I am also running RCT3 on a older P3 866 with no problems. Thanks Steve RE: ATI Xpress 1100 not good enough??? - RNDMS7E24 - Nov 10, 2006 Thats weird. Maybe try re installing RCT3. Do these errors during installation or in the actual game? RE: ATI Xpress 1100 not good enough??? - Wildtron - Nov 10, 2006 The error only occurs during start up. I only get the error message. No start up screens. then It shuts the program down. Steve