Water Transport rides - Printable Version +- RCTgo Forums (https://forums.rctgo.com) +-- Forum: The Games (https://forums.rctgo.com/forum-8.html) +--- Forum: RollerCoaster Tycoon Discussion (https://forums.rctgo.com/forum-9.html) +--- Thread: Water Transport rides (/thread-4657.html) |
Water Transport rides - zinger549 - Jul 5, 2009 When ever I try and build water transport I put in two stations like it shows on the tutorial. I try and test it and it says there is no route bettween staions on water transport 1. It happens with all 3 types (air, paddle, boat). The boat just comes out of the sation and turns around and goes back in to the station. RE: Water Transport rides - CarlosMarti123 - Jul 8, 2009 [deleted] RE: Water Transport rides - Rct3Matty - Aug 7, 2012 SAME HERE ITS REALY BAD RE: Water Transport rides - RCTgoMatthew - Aug 7, 2012 (Jul 8, 2009, 05:00 PM)CarlosMarti123 Wrote: You have to build a station on one place, then click the Start a New Segment of Track at a New Position button (found at the bottom-left of the Construction panel menu, with a Station icon and a star) to build another one through which the boat will pass too. This means they have to be from the same ride and not two different ones. If it still says there is no route between them then there is probably some other obstruction in their path. Right RE: Water Transport rides - Rct3steelcreator555 - Aug 7, 2012 Have you tried placing it on Clear Water? Like a lake? There is a video on youtube about it by TheRedPandas. Just watch his Let's Build A Park thing. RE: Water Transport rides - RCTgoMatthew - Aug 7, 2012 (Aug 7, 2012, 01:15 PM)Rct3steelcreator555 Wrote: Have you tried placing it on Clear Water? Like a lake? There is a video on youtube about it by TheRedPandas. Just watch his Let's Build A Park thing. I bet that will help when I actually need it RE: Water Transport ride THANKS GOT IT :D - Rct3Matty - Aug 8, 2012 (Aug 7, 2012, 12:21 PM)RCTgoMatthew Wrote:(Jul 8, 2009, 05:00 PM)CarlosMarti123 Wrote: You have to build a station on one place, then click the Start a New Segment of Track at a New Position button (found at the bottom-left of the Construction panel menu, with a Station icon and a star) to build another one through which the boat will pass too. This means they have to be from the same ride and not two different ones. If it still says there is no route between them then there is probably some other obstruction in their path. RE: Water Transport rides - RCTgoMatthew - Aug 8, 2012 Thanks for the info for when I need it |