+- RCTgo Forums (https://forums.rctgo.com)
+-- Forum: The Games (https://forums.rctgo.com/forum-8.html)
+--- Forum: RollerCoaster Tycoon Discussion (https://forums.rctgo.com/forum-9.html)
+--- Thread: My park got corrupted, but I fixed it. (/thread-4770.html)
My park got corrupted, but I fixed it. - Cobraderra - Apr 25, 2010
I see loads of posts on various RCT forums stating that they have had to cancel their parks or tracks or scenarios because somehow the file got corrupt.
Well I recently got the same problem but was not prepared to let weeks of work go to waste so set about trying to recover it. I will not bore you with all the troubleshooting details but rather go straight to the cutdown repair procedure.
Using the backup/s did not work. I ended up removing ALL the CS stuff I had installed to RCT3 and my park loaded again. It was however minus all the CS I had used but at least I could carry on with my park. Luckily I had not used very much CS so getting my park back to the way I wanted it only took about 30mins.
Hope this helps someone ... specially those of you who have given up on your creations.