i seen a Traintown video with spilt tracks on railways but i am not sure how i can do it and i seen signals for railway - old and new but i not sure where i can find them?
it would work on all rides - for example i wanted build express and local monorail system so trains can share line - while express skips the local station and local stops there - and also i wanted know if express trains can stop on same station with local trains on same track?
thanks

i seen a Traintown video with spilt tracks on railways but i am not sure how i can do it and i seen signals for railway - old and new but i not sure where i can find them?
it would work on all rides - for example i wanted build express and local monorail system so trains can share line - while express skips the local station and local stops there - and also i wanted know if express trains can stop on same station with local trains on same track?
thanks

Most likely what you saw isn't really a single railway, but two railways placed on top of each other using options.txt, which has an option that allows you to ignore the location of other objects and build there anyway.

so how i could find options txt?

There's a good guide on modifying your options.txt here:

http://www.ataricommunity.com/forums/sho...p?t=546285



Edit: And a thread on how to make a double stationed one here:

http://www.ataricommunity.com/forums/sho...p?t=510101

Except that talks about directly editing the file, while the first is editing through a special program - you should be able to "combine" instructions and use both (like only use step 3 and 4 in the second thread).

There's a good guide on modifying your options.txt here:

http://www.ataricommunity.com/forums/sho...p?t=546285



Edit: And a thread on how to make a double stationed one here:

http://www.ataricommunity.com/forums/sho...p?t=510101

Except that talks about directly editing the file, while the first is editing through a special program - you should be able to "combine" instructions and use both (like only use step 3 and 4 in the second thread).

i have big problem - i was trying to follow step 3 to create other ride that joins with monorail but when i try the track changes to red - so i need uninstall all RCT to make options txt work again or something?
i did able do split tracks in two within same monorail - i wanted split in two monorails lines - separate lines not one line - for example line A shares with line B and C in middle of park but line A splits from lines B and C with own trains

There's a good guide on modifying your options.txt here:

http://www.ataricommunity.com/forums/sho...p?t=546285



Edit: And a thread on how to make a double stationed one here:

http://www.ataricommunity.com/forums/sho...p?t=510101

Except that talks about directly editing the file, while the first is editing through a special program - you should be able to "combine" instructions and use both (like only use step 3 and 4 in the second thread).

i have big problem - i was trying to follow step 3 to create other ride that joins with monorail but when i try the track changes to red - so i need uninstall all RCT to make options txt work again or something?
i did able do split tracks in two within same monorail - i wanted split in two monorails lines - separate lines not one line - for example line A shares with line B and C in middle of park but line A splits from lines B and C with own trains

Did you edit your options.txt properly?

In JohnCJ's Options Editor, you would need to check "Allow track to intersect different track" and then click Save Options.

There's a good guide on modifying your options.txt here:

http://www.ataricommunity.com/forums/sho...p?t=546285



Edit: And a thread on how to make a double stationed one here:

http://www.ataricommunity.com/forums/sho...p?t=510101

Except that talks about directly editing the file, while the first is editing through a special program - you should be able to "combine" instructions and use both (like only use step 3 and 4 in the second thread).

i have big problem - i was trying to follow step 3 to create other ride that joins with monorail but when i try the track changes to red - so i need uninstall all RCT to make options txt work again or something?
i did able do split tracks in two within same monorail - i wanted split in two monorails lines - separate lines not one line - for example line A shares with line B and C in middle of park but line A splits from lines B and C with own trains

Did you edit your options.txt properly?

In JohnCJ's Options Editor, you would need to check "Allow track to intersect different track" and then click Save Options.

Yes i already tried

Sorry, but I'm not really an expert in this area of RCT3 You might want to try asking people at the Atari Community.

However, it sounds like, if you have Wild, you have to uninstall just Wild, apply the options.txt changes, and then install Wild again. I'm not certain, though.